K-15 CAS3164-85-0 Potassium2-ethylhexanoate

Pu catalyst: K-15 Active ingredients: CAS:3164-85-0

 

Overview:

Common name: Potassium isooctanoate solution

Other Chemical names:

Potassium2-ethylhexanoate,99.9%(metalsbasis),75%w/wsoln.;PotassiuM2-ethylhexanote;PotassiuM2-Ethylhexanoatehydratate;KaliumOctoate;Potassium2-ethyChemicalbooklhexanoatesolution,75wt.%solution,99.9%tracemetalsbasis;2-ethyl-hexanoicacipotassiumsalt;2-ETHYLHEXANOICACIDPOTASSIUMSALT;POTASSIUM2-ETHYLHEXANOATE Solution

Physical and chemical properties:

Appearance: Liquid.

Color: Colorless.

Odor: No odor.

Relative density: 1.13 (water=1)

Vapor pressure: < 19.20 mmHg at 21 °C

Density: 70.544 lb/ft3 (1.13 g/cm3) at 70 °F (21 °C)

Point Boiling Point/Range: > 572 °F (> 300 °C)

Flash point: 137.78 °C

Viscosity: 6000~1200mPas(25 °C)

Water solubility: completely dissolved.

Product use: Polyurethane catalyst

 

Features and uses:

Used in the production of rigid isocyanate foams.

K-15 is a solution of potassium-salt in diethylene glycol. It promotes the isocyanate reaction and is used in a wide range of rigid foam applications. For better surface curing, improved adhesion and better flow alternatives, consider TMR-2 catalysts.

K-15 is an excellent and cost-effective isocyanate catalyst. Its high conversion rate has established it as the catalyst of choice in a number of rigid applications.

 

Storage Information 

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

 

Package:

200KG/Steel Drum

2-[[2-(dimethylamino)ethyl]methylamino]ethanol

NT CAT T

(CAS:2212-32-0)

2-[[2-(dimethylamino)ethyl]methylamino]ethanol

NT CAT T, (CAS:2212-32-0),2-[[2-(dimethylamino)ethyl]methylamino]ethanol

NT CAT T, (CAS:2212-32-0),2-[[2-(dimethylamino)ethyl]methylamino]ethanol

Overview:

Common name: 2-[[2-(dimethylamino)ethyl]methylamino]ethanol

Other chemical names: N,N,N’-Trimethyl-N’-(2-hydroxyethyl)-1,2-ethanediamine;

N-[2-(Dimethylamino)ethyl]-N-methylethanolamine;CATALYSTJD-36;N,N,N”-Trimethyl-N”-(2-hydroxyethyl)-ethyChemicalbooklenediamine;DABCOT;2-[Methyl[2-(dimethylamino)ethyl]amino]ethanol;N,N,N?-trieMthylaMinoethyl-N?-MethylaMinoehylanol;2-[[2-(dimethylamino)ethyl]methylamino]etanol

MF? C7H18N2O

MW? 146.23

CAS? 2212-32-0

Typical Properties
Flash Point, °C (PMCC) 89
Viscosity @ 25 °C mPa*s1 7
Specific Gravity @ 25 °C (g/cm3) 0.91
Water Solubility Soluble
Calculated OH Number (mgKOH/g) 387
Appearance Pale yellow liquid

 

Features and uses:

Applications for  NT CAT T include spray foam insulation, flexible slabstock, packaging foam, automotive instrument panels and other areas where a catalyst providing low residual odor or non-migrating performance is required.

The usage levels of  NT CAT T are dependent on the requirements of the particular application. When producing flexible or molded foams, it is recommended that  NT CAT T be used in conjunction with a strong gelling catalyst such as 33-LV catalyst.

 

Storage Information

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided.

 

Shelf Life: 24 Months

 

Equal to Dabco T/Jeffcat Z-110/Lupragen N400/PC CAT NP80/Toyocat RX5

CAS:2212-32-0

NT CAT T

(CAS:2212-32-0)

2-[[2-(dimethylamino)ethyl]methylamino]ethanol

NT CAT T, (CAS:2212-32-0),2-[[2-(dimethylamino)ethyl]methylamino]ethanol

NT CAT T, (CAS:2212-32-0),2-[[2-(dimethylamino)ethyl]methylamino]ethanol

Overview:

Common name: 2-[[2-(dimethylamino)ethyl]methylamino]ethanol

Other chemical names: N,N,N’-Trimethyl-N’-(2-hydroxyethyl)-1,2-ethanediamine;

N-[2-(Dimethylamino)ethyl]-N-methylethanolamine;CATALYSTJD-36;N,N,N”-Trimethyl-N”-(2-hydroxyethyl)-ethyChemicalbooklenediamine;DABCOT;2-[Methyl[2-(dimethylamino)ethyl]amino]ethanol;N,N,N?-trieMthylaMinoethyl-N?-MethylaMinoehylanol;2-[[2-(dimethylamino)ethyl]methylamino]etanol

MF? C7H18N2O

MW? 146.23

CAS? 2212-32-0

Typical Properties
Flash Point, °C (PMCC) 89
Viscosity @ 25 °C mPa*s1 7
Specific Gravity @ 25 °C (g/cm3) 0.91
Water Solubility Soluble
Calculated OH Number (mgKOH/g) 387
Appearance Pale yellow liquid

 

Features and uses:

Applications for  NT CAT T include spray foam insulation, flexible slabstock, packaging foam, automotive instrument panels and other areas where a catalyst providing low residual odor or non-migrating performance is required.

The usage levels of  NT CAT T are dependent on the requirements of the particular application. When producing flexible or molded foams, it is recommended that  NT CAT T be used in conjunction with a strong gelling catalyst such as 33-LV catalyst.

 

Storage Information

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided.

 

Shelf Life: 24 Months

 

Equal to Dabco T/Jeffcat Z-110/Lupragen N400/PC CAT NP80/Toyocat RX5