TMG N,N,N,N-Tetramethylguanidine CAS80-70-6

TMG N,N,N,N-Tetramethylguanidine CAS80-70-6

N,N,N,N-Tetramethylguanidine

CAS No.: 80-70-6

Overview:                          

Common Name: N,N,N,N-Tetramethylguanidine

Other Chemical Names:

N,N’-Tetramethylguanidine;1,1,3,3-TetramethylGuanidine(TMG);1,1,3,3-Tetramethylgyanidine, 1,1,3,3-TetrChemicalbookamethylguanidine, ;N,N,N,N-Tetramethy1Guanidine; 1,1,3,3-Tetramethylguanidin; TMG; 1,1,3tetramethylguanidine

MF? C5H13N3

MW? 115.18

CAS? 80-70-6

Typical Properties:

AppearanceForm: liquidColour: light yellow
PH12.7 at 10 g/l at 25 °C
Melting point/freezing pointMelting point/range: -80 °C at 1,013 hPa
Initial boiling point and boiling range162 – 163 °C – lit.162 °C at 1,013 hPa
Flash point50 °C – closed cup
Density 0.916g/cm3 at 20?
Vapour pressure2.9 hPa at 20 °C

Description?

In organic synthesis, 1,1,3,3-tetramethylguanidine is used as a strong, non-nucleophilic base. 1,1,3,3-tetramethylguanidine is an efficient and selective catalyst for alcohol benzoylation.

Physical and chemical properties tetramethylguanidine is a colorless oily liquid, boiling point 160-162?, density 0.918, refractive index 1.4692, is a strong organic base, soluble in toluene, cyclohexanone, ethanol, etc., also Chemicalbook soluble in water, easily hydrolyzed to tetramethyl urea in alkaline aqueous solution, corrosive, generally packed in galvanized iron drums.

Applications?

NT CAT TMG can also be used as a catalyst for polyurethane foam and for even dyeing of nylon, wool and other proteins to improve the durability of wool, etc. It is mainly used in the synthesis of cefradine and other drugs.

Storage Information?

NEWTOP Chemical recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30° C. Lower and higher storage temperatures are not preferable and should be avoided.

Shelf Life:

24 Months

Standard Packaging:

180KG Steel Drum

900KGl IBC Drum

Inquiry contact?sales@newtopchem.com

TMEDA N,N,N’,N’-Tetramethylethylenediamine CAS110-18-9

TMEDA (N,N,N’,N’-Tetramethylethylenediamine)

CAS No.110-18-9

 

Over view

Common Name: N,N,N’,N’-Tetramethylethylenediamine

Other Chemical Names: N,N,N’,N’-Tetramethylethane-1,2-diamine, electrophoresis grade;Four MethylEthylenediaMine;N,N,N’,N’-TetraMethylethylenediaMine

Molar formular C6H16N2
Molar mass 116.2

 

 

Physical and chemical properties:

a) Appearance Form: Transparent colorless liquid
b) Melting point/freezing point Melting point/range: -55 °C – lit.
c) Initial boiling point and

boiling range

120 – 122 °C – lit.
d) Flash point 20 °C – closed cup
e) Evaporation rate no data available
f) Flammability (solid, gas) no data available
g) Upper/lower

flammability or

explosive limits

Upper explosion limit: 9,08 %(V)

Lower explosion limit: 0,98 %(V)

h) Relative density 0,775 g/cm3 at 20 °C
i) Water solubility soluble
j) Partition coefficient: log Pow: 0,3
   
   

Features and uses:

NT CAT TMEDA is a colorless-to-straw, liquid, tertiary amine with a characteristic aminic odor. It is readily soluble in water, ethyl alcohol, and other organic solvent.

It is used as an intermediate in organic synthesis. It is also used as a cross linking catalyst for polyurethane rigid foams.

Storage Information

NEWTOP Chemical recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

 

Package:

160KG Steel Drum

 

(Toyocat TE/ Kaolizer 11/ Dabco TMEDA)

DMAEE CAS1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

Overview:

Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF? C6H15NO2

MW?133.19

CAS? 1704-62-7

 

Physical and chemical properties:

Form: liquid  
Odour: mild, amine-like  
Colour: colourless to yellow  
pH value: 11.5 ( 1.. g/l)
Melting point: No data available  
Boiling point: 235 °C ( 1.13 hPa)
Vapour pressure: < 1 mbar ( 25 °C)
Density: 0.9549 g/cm3 ( 20°C)
Relative density: 0.9549 ( 20 °C)
Partitioning coefficient n -1.21 (calculated)
octanol/water (log Pow):    
Viscosity, dynamic: 1. mPa.s ( 25 °C)
Solubility in water:    
Molar mass: 133.19 g/mol  

 

Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.

 

Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.

 

Package:

190KG/Steel Drum

 

(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)