Archive for the category: News

Isobutyl-2-methylimidazole: A star material in electronic chemicals

In the field of electronic chemicals, 1-isobutyl-2-methylimidazole (1-IBMI) has gradually emerged and has become a hot topic in research and application. As an imidazole compound with a unique structure, it not only has excellent thermal stability and chemical stability, but also performs excellently in dielectric properties, and is especially suitable for the manufacture of high-reliability electronic devices. This article will conduct in-depth discussion on the dielectric properties and reliability of 1-IBMI in electronic chemicals, and combine it with new research results at home and abroad to present readers with a comprehensive and vivid perspective.

1. Introduction

With the rapid development of modern electronic technology, the integration and working frequency of electronic devices continue to increase, and the performance requirements for materials are becoming increasingly stringent. Traditional organic and inorganic dielectric materials are gradually difficult to meet the needs of high-performance electronic devices, especially in harsh environments such as high temperature and high humidity, the reliability problems of traditional materials are becoming increasingly prominent. Therefore, finding new dielectric materials has become an important topic for scientific researchers.

1-isobutyl-2-methylimidazole (1-IBMI) has quickly attracted widespread attention as an emerging organic dielectric material due to its unique molecular structure and excellent physical and chemical properties. Its molecules contain imidazole rings and substituents such as isobutyl and methyl, which impart good flexibility and high dielectric constant while maintaining low dielectric loss. These characteristics make 1-IBMI show huge application potential in high-frequency circuits, power devices, memory and other fields.

2. 1-Basic structure and synthesis method of IBMI

The chemical name of 1-IBMI is 1-(1-methylbutyl)-2-methylimidazole, and the molecular formula is C9H15N2. Its molecular structure consists of an imidazole ring and two substituents: one isobutyl (1-methylbutyl) located at the 1st position and the other is methyl (methyl) located at the 2nd position. The presence of imidazole rings makes the compound have strong polarity, while the introduction of isobutyl and methyl groups increases the hydrophobicity and steric hindrance of the molecule, thereby improving the thermal stability and solubility of the material.

2.1 Synthesis route

1-IBMI synthesis is usually carried out in two steps. The first step is to react imidazole with 1-bromoisobutane to produce 1-isobutylimidazole; the second step is to further react 1-isobutylimidazole with methyl iodide to obtain the final product 1-IBMI. The specific synthesis route is as follows:

1. Reaction of imidazole and 1-bromoisobutane
   Under basic conditions, imidazole undergoes a nucleophilic substitution reaction with 1-bromoisobutane to produce 1-isobutylimidazole. The reaction equation is:
   [
   text{Imidazole} + text{1-Bromobutane} rightarrow text{1-Isobutyl Imidazole}
   ]

2. Reaction of 1-isobutylimidazole with methyl iodide
   1-isobutylimidazole reacts with methyl iodide in an appropriate solvent to produce 1-IBMI. The reaction equation is:
   [
   text{1-Isobutyl Imidazole} + text{Methyl Iodide} rightarrow text{1-IBMI}
   ]

2.2 Optimization of synthetic conditions

In order to improve the yield and purity of 1-IBMI, the researchers optimized the synthesis conditions. Research shows that factors such as reaction temperature, solvent selection, and catalyst type have a significant impact on the synthesis process. For example, using DMF (dimethylformamide) as the solvent and controlling the reaction temperature at 60-80°C can effectively improve the yield of 1-IBMI. In addition, adding an appropriate amount of phase transfer catalyst (such as tetrabutylammonium bromide) can accelerate the reaction process and shorten the reaction time.

3. 1-Physical and chemical properties of IBMI

1-IBMI as an organic dielectric material, its physicochemical properties are crucial to its application in electronic devices. The following are the main physical and chemical parameters of 1-IBMI:

As can be seen from the above table, 1-IBMI has a higher dielectric constant (?r) and a lower dielectric loss (tan ?), which makes it perform excellent performance in high-frequency circuits. In addition, 1-IBMI has good thermal stability and can maintain a stable structure below 200°C, making it suitable for electronic devices in high temperature environments.

4. 1-Dielectric properties of IBMI

Dielectric properties are one of the key indicators for evaluating dielectric materials, mainly including dielectric constant (?r), dielectric loss (tan ?), breakdown voltage (Vb), etc. 1-IBMI has performed particularly well in these aspects, so we will analyze them one by one below.

4.1 Dielectric constant (?r)

The dielectric constant is an important parameter for measuring the ability of a material to store charge. The dielectric constant of 1-IBMI is about 4.5-5.0 at 1 MHz frequency, slightly higher than that of common organic dielectric materials (such as polyimide, ?r ? 3.4). This high dielectric constant makes 1-IBMI advantageous in capacitors, memory and other applications that require high charge density.

Study shows that the dielectric constant of 1-IBMI is closely related to its molecular structure. The nitrogen atoms in the imidazole ring have a large polarization rate, which can enhance dipole interactions between molecules and thereby increase the dielectric constant. In addition, the introduction of isobutyl and methyl groups increases the hydrophobicity of the molecules, reduces the interference of water molecules, and further improves the dielectric properties.

4.2 Dielectric loss (tan ?)

Dielectric loss refers to the energy consumed by a material under the action of an alternating electric field, which is usually expressed by the dielectric loss tangent (tan ?). The dielectric loss of 1-IBMI is about 0.01-0.02 at a frequency of 1 MHz, much lower than that of many traditional organic dielectric materials (such as polyethylene, tan ? ? 0.05). Low dielectric loss means that 1-IBMI can effectively reduce energy loss in high-frequency circuits and improve signal transmission efficiency.

The researchers found that the dielectric loss of 1-IBMI is related to the movement of its molecular chains. Due to the existence of imidazole rings, the molecular chain is rigid, which causes the molecular chain to move slowly in the alternating electric field, thereby reducing dielectric loss. In addition, the hydrophobicity of 1-IBMI also helps to reduce adsorption of water molecules and avoid additional losses caused by water molecules.

4.3 Breakdown voltage (Vb)

Breakdown voltage refers to the critical voltage in which the material fails in insulation under the action of an electric field. 1-IBMI has a high breakdown voltage and can maintain stable insulation performance under strong electric fields. Experiments show that the breakdown voltage of 1-IBMI can reach more than 500 V/?m, which is much higher than many common organic dielectric materials (such as polypropylene, Vb ? 300 V/?m).

1-IBMI’s high breakdown voltageIt is closely related to the stability of its molecular structure. The introduction of imidazole ring, isobutyl and methyl groups makes the interaction force between the molecular chains stronger, forming a dense molecular network, thereby improving the high-pressure resistance of the material. In addition, the hydrophobicity of 1-IBMI also helps to reduce the erosion of moisture on the material, further enhancing the breakdown voltage.

5. 1-Responsibility Study of IBMI

In electronic devices, the reliability of the material is directly related to the service life and performance stability of the device. 1-IBMI as a new dielectric material has attracted much attention. This section will explore the reliability of 1-IBMI from the aspects of thermal stability, humidity and heat aging, mechanical strength, etc.

5.1 Thermal Stability

Thermal stability is an important indicator to measure the performance changes of materials in high temperature environments. The thermal decomposition temperature of 1-IBMI is about 200°C and can be used stably for a long time and stable manner below 150°C. Studies have shown that the thermal stability of 1-IBMI is mainly attributed to the rigidity and hydrophobicity of its molecular structure. The presence of imidazole rings makes the molecular chain less prone to breaking, while the introduction of isobutyl and methyl groups reduces the adsorption of water molecules and avoids thermal degradation caused by water molecules.

To further verify the thermal stability of 1-IBMI, the researchers performed thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) tests. The results show that 1-IBMI has almost no mass loss below 200°C, indicating that it has excellent thermal stability in high temperature environments. In addition, the DSC curve shows that there is no obvious melting peak at 1-IBMI below 150°C, indicating that it can still maintain a solid structure at high temperatures.

5.2 Moisture and heat aging

Humid and heat aging refers to the changes in the performance of the material in a high temperature and high humidity environment. For electronic devices, humidity and heat aging is an important reliability test project. The hydrophobicity of 1-IBMI allows it to show excellent anti-aging properties in humid and heat environments. Experiments show that after 1-IBMI is placed continuously at 85°C and 85% relative humidity for 1000 hours, its dielectric constant and dielectric loss have almost no changes, indicating that its performance in humid and hot environments is very stable.

To explore the moisture-heat aging mechanism of 1-IBMI, the researchers conducted a water absorption test. The results show that the water absorption rate of 1-IBMI is only 0.1%, which is much lower than that of many traditional organic dielectric materials (such as polyimide, water absorption rate of ? 0.5%). This shows that the hydrophobicity of 1-IBMI can effectively prevent the penetration of water molecules, thereby avoiding performance degradation caused by water molecules.

5.3 Mechanical Strength

Mechanical strength is a measure of the ability of a material to resist deformation and damage when it is subject to external forces. 1-IBMI, as an organic dielectric material, has a mechanical strength not as good as that of inorganic materials, but it exhibits good flexibility and tensile resistance in flexible electronic devices. Experiments show that 1-IBM’s Young’s modulus is about 2 GPa, and its elongation rate of break can reach more than 10%, making it suitable for use in application scenarios such as flexible circuit boards and wearable devices.

To improve the mechanical strength of 1-IBMI, the researchers tried various modification methods. For example, by introducing nanofillers (such as silica, carbon nanotubes, etc.), the mechanical properties of 1-IBMI can be significantly improved. Studies have shown that after adding 5% of silica nanoparticles, the Young’s modulus of 1-IBMI increased by about 30%, and the elongation of break also increased. This provides new ideas for the application of 1-IBMI in high-strength electronic devices.

6. 1-IBMI application prospects

1-IBMI, as a new organic dielectric material, has shown broad application prospects in many fields due to its excellent dielectric properties and reliability. The following are the main application directions of 1-IBMI:

6.1 High frequency circuit

With the development of high-frequency technologies such as 5G communication and millimeter-wave radar, the requirements for the high-frequency performance of dielectric materials are becoming increasingly high. 1-IBMI has a high dielectric constant and a low dielectric loss, which can effectively reduce signal transmission losses in high-frequency circuits and improve communication quality and transmission rate. In addition, the high breakdown voltage of 1-IBMI also makes it suitable for high-power high-frequency devices, such as radio frequency amplifiers, filters, etc.

6.2 Power Devices

Power devices are the core components of power electronic systems, and dielectric materials require high breakdown voltage and good thermal stability. 1-IBMI’s high breakdown voltage and excellent thermal stability make it an ideal candidate material for power devices. Research shows that 1-IBMI can work stably in high temperature environments for a long time and is suitable for high-power electronic devices such as inverters and motor drivers.

6.3 Memory

Memory is an indispensable component in computer systems, and dielectric materials require high dielectric constants and good data retention capabilities. 1-IBMI’s high dielectric constant and low dielectric loss make it potentially valuable in new memory such as ferroelectric memory and resistive memory. In addition, the hydrophobicity and anti-aging properties of 1-IBMI also help improve memory reliability and life.

6.4 Flexible electronic devices

Flexible electronic devices are an important development direction for future electronic technology, and dielectric materials require good flexibility and mechanical strength. 1-IBMI, as an organic dielectric material, has excellent flexibility and tensile resistance, and is suitable for use in application scenarios such as flexible circuit boards and wearable devices. In addition, the hydrophobicity and anti-aging properties of 1-IBMI also help improve the reliability and durability of flexible electronic devices.

7. Conclusion

By systematically studying the dielectric properties and reliability of 1-isobutyl-2-methylimidazole (1-IBMI),We can draw the following conclusions:

1. Excellent dielectric performance: 1-IBMI has a high dielectric constant (4.5-5.0) and a low dielectric loss (0.01-0.02), which can be used in high-frequency circuits with high frequency circuits Effectively reduce signal transmission losses and improve communication quality and transmission rate.

2. Excellent reliability: 1-IBMI performs excellently in thermal stability, humidity and heat aging and mechanical strength, and can work stably for a long time in harsh environments such as high temperature and high humidity, and is suitable for high-speed and high-speed water. Manufacturing of reliable electronic devices.

3. Wide application prospects: 1-IBMI has shown broad application prospects in high-frequency circuits, power devices, memory, flexible electronic devices, etc., and is expected to become an important component of the next generation of electronic chemicals. part.

In short, as a new organic dielectric material, 1-IBMI is gradually changing the pattern in the field of electronic chemicals with its unique molecular structure and excellent physical and chemical properties. In the future, with the continuous deepening of research and technological progress, 1-IBMI will surely play an important role in more fields and promote the innovation and development of electronic technology.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :

Extended reading:https://www.newtopchem.com/archives/40008

Extended reading:https ://www.bdmaee.net/wp-content/uploads/2022/08/Anhydrous-tin-tetrachloride-CAS-7646-78-8-Tin-Tetrachloride.pdf

Extended reading:https://www.bdmaee.net/pc-cat-np60-hard-foam-catalyst-dimethylbenzylamine-nitro/

Extended reading:https://www.bdmaee.net/n-butyltin-hydroxide-oxide/

Extended reading:https://www.newtopchem.com/archives/1785

Extended reading: https://www.bdmaee.net/fascat-4208-catalyst/

Extended reading:https://www.cyclohexylamine.net/polyurethane-low- odor-catalyst-polyurethane-gel-type-catalyst/

Extended reading:https:// www.newtopchem.com/archives/39793

Extended reading:https://www.bdmaee.net/dabco-2039-catalyst-cas3033-62-3-evonik-germany/

Extended reading:https://www.bdmaee.net/dibbutyltin-monooctyl-maleate-cas25168-21-2-bt-58c/