Dimethylbenzylamine benzyldimethylamine rigid foam catalyst BDMA N-benzyldimethylamine BDMA

Overview:
Name: Dimethylbenzylamine, benzyldimethylamine
Nickname: BDMA, N-dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, hard foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, N, N-dimethylbenzylbenzylamine, benzyldimethylamine, dimethyltibenzylamine, N N-dimethylbenzylamine, N, N-dimethylbenzylamine, N, N-dimethylbenzylamine, N-benzyldimethylamine, 98+%
N. N-Dimethylbenzylamine [English name]:
AURORA KA-7522
BENZYLDIETHYLAMINE
N-BENZYLDIETHYLAMINE
N. N-DIETHYLBENZYLAMINE
Araldite accelerator 062
Arraditeaccelerator062
Benzenemethamine, N, N-dimethyl-
Benzenemetamine, N, N-dimethyl-
Benzylamine, N, N-dimethyl-
Benzyl-N, N-dimethylamine
Dabco B-16
N – (Phenoymethyll) dimethylamine
N. N-Dimethyl (phenyl) metamine
n. N-dimethyl-benzenemethanamin
n. N-dimethyl-benzylamin
N. N-Dimethyl-N-benzylamine
Pentamine BDMA etc
Sumine 2015
Sumine2015
Dimethylbenzylamine, 98%

Molecular formula: C9H13N;
Relative molecular weight: 135.20;
CAS number: 103-83-3;
Colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;
Purity ? 99%;
Moisture ? 0.5%;
Viscosity (25 ?): 90mPa. s;
Density (25 ?): 0.897g/cm3;
Freezing point: -75 ?;
Boiling range: 178-184 ?;
Refractive index (25 ?): 1.5011;
Flash point (TCC): 54 ?;
Steam pressure (20 ?): 200Pa
Physical and chemical properties
Appearance properties
Colorless to light yellow liquid.
Solubility
Slightly soluble in cold water, soluble in hot water, and miscible with alcohols and ethers.
melting point
-75 ° C
boiling point
183-184 ° C765 mm Hg (lit.)
density
0.9 g/mL at 25 ° C (lit.)
Refractive index
N20/D1.501 (lit.)
flash point
130 ° F
Storage conditions
Flammables area
Water solubility
8 g/L (20 º C)
BRN
one million ninety-nine thousand six hundred and twenty
Usage:
BDMA is the catalyst of polyester polyurethane block soft foam, polyurethane hard foam, polyurethane sheet and adhesive coating in the polyurethane industry, mainly used for hard foam, which can make polyurethane foam have good early fluidity and uniform foam pores, and foam body has good adhesion with the substrate;
BDMA is mainly used in the field of organic synthesis as a catalyst, corrosion inhibitor, acid neutralizer, and accelerator for embedding electron microscopy sections in the synthesis of dehydrogenated halogens in organic drugs;
BDMA is also used for synthesizing quaternary ammonium salts and producing cationic surface active strong fungicides, etc;
BDMA is mainly used in epoxy resin to promote curing systems such as acid anhydrides, polyamides, and fatty amines, accelerate product curing, and is widely used as a curing accelerator in epoxy resin electronic encapsulation materials, encapsulation materials, epoxy floor coatings, and ship paints;
The specific application examples of BDMA include: carbon fiber/single-molecule epoxy resin based composite laminates, electrophoretic coatings for epoxy substrates, and dry transformer sealing adhesives;
Benzyl dimethylamine, mainly used for rigid foam, can make polyurethane foam have good early fluidity and uniform foam pores, and can improve the adhesion between foam body and substrate. The recommended addition amount is 3-5 PPHP (per 100 parts of polyol)
Alias:
Dimethylbenzylamine
Benzyldimethylamine
Catalyst BDMA
Hard Bubble Catalyst BDMA
N-benzyldimethylamine
BDMA
CAS 103-83-3
N. N-Dimethylbenzylamine
Storage and transportation:
Should be sealed and stored in a dry, cool, and ventilated warehouse
Packaging:
200KG/barrel storage: It is recommended to store in a dry and cool area with appropriate ventilation. Please tighten the packaging cover as soon as possible after the original packaging to prevent water ingress and other substances from affecting product performance. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating, and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene habits.
Related reading recommendations:

Dabco 33-S/Microporous catalyst

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge catalyst

High efficiency amine catalyst/Dabco amine catalyst

Non-emissive polyurethane catalyst/Dabco NE1060 catalyst

Dabco NE1060/Non-emissive polyurethane catalyst

NT CAT U28

NT CAT U26

NT CAT K-15

NT CAT D60

TMPEDA

TEDA

Morpholine

2-(2-Aminoethoxy)ethanol

DMAPA

Bismuth 2-ethylhexanoate CAS 67874-71-9 Tri (2-ethylhexanoate) bismuth

Overview:
Chinese alias: Bismuth ethylhexanoate, Bismuth tris (2-ethylhexanoate), Bismuth isooctanoate
Nicknames: BDMA, dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, hard foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, Lupragen N103,
Bismuth isooctanoate
Bismuth 2-ethylhexanoate
CAS 67874-71-9
Chinese name: Bismuth 2-ethylhexanoate
English alias
BiCAT HM2 ethylhexanicicismuth (3+) saltBi Hex CemCoscat 28Bismuth Hex CemBorci Kat 242-Ethylhexanicicid, bismuthsaltBismuth (3+) 2-ethylhexanate
Molecular formula: Bi [OOCCH (C2H5) C4H9] 3
Relative molecular weight: 638.61
CAS number: 67874-71-9
Physical and chemical properties:
Bismuth isooctanoate is a light yellow transparent oily liquid under normal conditions.
Viscosity (25 ?): 50mPa. s
Density (25 ?): 1.22g/cm3
Water solubility: insoluble in water
Flash point (PMCC): 158 ?
Hydroxyl value: 0
Boiling point: 228 ° Cat760mmHg
Flash point: 116.6 ° C
LogP: 6.63090
Color: Brown liquid.
Solubility: Undetermined.
security information
Packaging level: III
Hazard category: 3
Dangerous goods transportation code: 1993
Hazard category code: R36/37/38
Safety instructions: S26; S36; S37; S39
Application:
Bismuth isooctanoate is a bismuth metal carboxylate catalyst that can be used as an auxiliary catalyst for tertiary amines to accelerate the reaction and curing of amino acid esters; Bismuth isooctanoate can be used to replace tin metal catalyst in soft block foam, high-density soft foam, spray foam, microporous foam and hard foam system.
Bismuth isooctanoate
Bismuth 2-ethylhexanoate
67874-71-9
Storage and transportation:
Should be sealed and stored in a dry, cool, and ventilated warehouse
Packaging:
200KG/barrel storage: It is recommended to store in a dry and cool area with appropriate ventilation. Please tighten the packaging cover as soon as possible after the original packaging to prevent water ingress and other substances from affecting product performance. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating, and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene habits.
Related reading recommendations:
Addocat 106/TEDA-L33B/DABCO POLYCAT
Dabco 33-S/Microporous catalyst
Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst
Dabco amine catalyst/Low density sponge catalyst
High efficiency amine catalyst/Dabco amine catalyst
Non-emissive polyurethane catalyst/Dabco NE1060 catalyst
NT CAT A-1
NT CAT 33L
NC CAT T
NT CAT 33LV
NT CAT ZF-10
NT CAT U28
NT CAT U26
NT CAT K-15
NT CAT D60
TMPEDA

Polyurethane catalyst K15 potassium isooctanoate 2-ethylhexanoate potassium salt CAS 3164-85-0

Overview:
Chinese name: Potassium Isooctanoate
Nicknames: catalyst K-15, polyurethane catalyst K-15, trimeric catalyst K-15, CAS 3164-85-0, hard foam trimeric catalyst K-15, hard foam catalyst K-15
English name: Potassium Octate
Molecular formula: C8H15O2K
Molecular weight: 182.30
CAS number: 3164-85-0
Chinese name
Potassium isooctanoate, potassium 2-ethylhexanoate, potassium 2-ethylhexanoate, potassium 2-ethylhexanoate hydrate, potassium 2-ethylhexanoate
Molecular structure:
See figure
Molecular formula:
C8H15KO2
Molecular weight:
one hundred and eighty-two point three
CAS number:
3164-85-0
EINECS number:
221-625-7
MDL number
MFCD00045896
molecular weight
one hundred and eighty-two point three
Physical and chemical properties:
Appearance: Colorless liquid
Viscosity (25 ?, mPa. s): 5400
Density (25 ?, g/cm3): 1.13
Water solubility: soluble in water
Flash point (PMCC, ?): 138
Hydroxyl value (mgKOH/g): 271
English name: Kalium Octoate
Molecular formula: C8H15O2K
Molecular weight: 182.30
Content: ? 98%
Moisture content: ? 2%
CAS No.: 3164-85-0
Appearance: White to light yellow solid
characteristic
Excellent chemical stability. This product has the advantages of stable acid value, stable molecular weight, light color, and good catalytic effect, and can completely replace potassium naphthenate. The solubility of solutes belongs to total solubility. This product is a universal sodium salt agent used for the synthesis of antibiotic solvents. Compared with the traditional salt forming agent sodium acetate, its obvious advantages lie in its gentleness and stability after salt forming, and it can be dissolved in many organic solvents, which is conducive to the separation of anhydrous final products and improves the quality and yield of products.

Usage:
K-15 is usually a solid and is usually dissolved and diluted with diethylene glycol to form a solution;
K-15 is suitable for use in high viscosity polyol formulations to promote isocyanate reactions with high activity;
K-15 is widely used in spraying hard foam, PIR hard foam and other kinds of PU hard foam.
Mainly used as a salt forming agent for the synthesis of cephalosporin antibiotics, a crosslinking agent for polymer materials, a heat stabilizer for plastic products, a catalyst for polymerization reactions, and an additive for lubricating and fuel oils. In the polymerization process of polyester resin system, promoting the catalysis of cobalt soap effectively reduces the amount of cobalt used; It can also be used to make dyes, spices, preservatives, etc.
Application:
Polyurethane hard foam trimerization catalyst with high activity, suitable for spraying, hard foam, PIR hard foam, PU hard foam. It is recommended to add 3-5 PPHP (per 100 parts of polyols)
Storage and transportation:
Should be sealed and stored in a dry, cool, and ventilated warehouse
Packaging:
200KG/barrel storage: It is recommended to store in a dry and cool area with appropriate ventilation. Please tighten the packaging cover as soon as possible after the original packaging to prevent water ingress and other substances from affecting product performance. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating, and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and reuse them after washing. Maintain good hygiene habits.
Related reading recommendations:

DABCO MP608/Delayed equilibrium catalyst

TEDA-L33B/DABCO POLYCAT/Gel catalyst

Addocat 106/TEDA-L33B/DABCO POLYCAT

NT CAT DMP-30

NT CAT DMEA

NT CAT BDMA

NT CAT PC-9

NT CAT ZR-50

dimethomorph

3-morpholinopropylamine

4-Acryloylmorpholine

N-Acetylmorpholine