TMEDA N,N,N’,N’-Tetramethylethylenediamine CAS110-18-9

TMEDA (N,N,N’,N’-Tetramethylethylenediamine)

CAS No.110-18-9

 

Over view

Common Name: N,N,N’,N’-Tetramethylethylenediamine

Other Chemical Names: N,N,N’,N’-Tetramethylethane-1,2-diamine, electrophoresis grade;Four MethylEthylenediaMine;N,N,N’,N’-TetraMethylethylenediaMine

Molar formular C6H16N2
Molar mass 116.2

 

 

Physical and chemical properties:

a) Appearance Form: Transparent colorless liquid
b) Melting point/freezing point Melting point/range: -55 °C – lit.
c) Initial boiling point and

boiling range

120 – 122 °C – lit.
d) Flash point 20 °C – closed cup
e) Evaporation rate no data available
f) Flammability (solid, gas) no data available
g) Upper/lower

flammability or

explosive limits

Upper explosion limit: 9,08 %(V)

Lower explosion limit: 0,98 %(V)

h) Relative density 0,775 g/cm3 at 20 °C
i) Water solubility soluble
j) Partition coefficient: log Pow: 0,3
   
   

Features and uses:

NT CAT TMEDA is a colorless-to-straw, liquid, tertiary amine with a characteristic aminic odor. It is readily soluble in water, ethyl alcohol, and other organic solvent.

It is used as an intermediate in organic synthesis. It is also used as a cross linking catalyst for polyurethane rigid foams.

Storage Information

NEWTOP Chemical recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

 

Package:

160KG Steel Drum

 

(Toyocat TE/ Kaolizer 11/ Dabco TMEDA)

DMAEE CAS1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol

Overview:

Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF? C6H15NO2

MW?133.19

CAS? 1704-62-7

 

Physical and chemical properties:

Form: liquid  
Odour: mild, amine-like  
Colour: colourless to yellow  
pH value: 11.5 ( 1.. g/l)
Melting point: No data available  
Boiling point: 235 °C ( 1.13 hPa)
Vapour pressure: < 1 mbar ( 25 °C)
Density: 0.9549 g/cm3 ( 20°C)
Relative density: 0.9549 ( 20 °C)
Partitioning coefficient n -1.21 (calculated)
octanol/water (log Pow):    
Viscosity, dynamic: 1. mPa.s ( 25 °C)
Solubility in water:    
Molar mass: 133.19 g/mol  

 

Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.

 

Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.

 

Package:

190KG/Steel Drum

 

(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)

K-15 CAS3164-85-0 Potassium2-ethylhexanoate

Pu catalyst: K-15 Active ingredients: CAS:3164-85-0

 

Overview:

Common name: Potassium isooctanoate solution

Other Chemical names:

Potassium2-ethylhexanoate,99.9%(metalsbasis),75%w/wsoln.;PotassiuM2-ethylhexanote;PotassiuM2-Ethylhexanoatehydratate;KaliumOctoate;Potassium2-ethyChemicalbooklhexanoatesolution,75wt.%solution,99.9%tracemetalsbasis;2-ethyl-hexanoicacipotassiumsalt;2-ETHYLHEXANOICACIDPOTASSIUMSALT;POTASSIUM2-ETHYLHEXANOATE Solution

Physical and chemical properties:

Appearance: Liquid.

Color: Colorless.

Odor: No odor.

Relative density: 1.13 (water=1)

Vapor pressure: < 19.20 mmHg at 21 °C

Density: 70.544 lb/ft3 (1.13 g/cm3) at 70 °F (21 °C)

Point Boiling Point/Range: > 572 °F (> 300 °C)

Flash point: 137.78 °C

Viscosity: 6000~1200mPas(25 °C)

Water solubility: completely dissolved.

Product use: Polyurethane catalyst

 

Features and uses:

Used in the production of rigid isocyanate foams.

K-15 is a solution of potassium-salt in diethylene glycol. It promotes the isocyanate reaction and is used in a wide range of rigid foam applications. For better surface curing, improved adhesion and better flow alternatives, consider TMR-2 catalysts.

K-15 is an excellent and cost-effective isocyanate catalyst. Its high conversion rate has established it as the catalyst of choice in a number of rigid applications.

 

Storage Information 

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

 

Package:

200KG/Steel Drum

123456120